JTOPTICS® 800GBASE SR8 100m QSFP DD optical transceiver, 800G QSFP DD SR8 (JT 800G QSFPDD SR8) is designed to operate over multimode fiber systems using a nominal wavelength of 850nm (MMF). It is compliant with the QSFP28 MSA and IEEE 802.3cd 200GBASE SR4. It integrates eight data lanes in each direction with 8x53.125G. The electrical interface uses a 76 contact edge type connector. The optical interface uses a 16 fiber MTP (MPO) connector.8 channels full duplex transceiver modulesTransmission data rate up to 106.25G per 8x53Gbps PAM4 8x106.25Gbps PAM4 transmitter and PAM4 receiver 8 channels 850nm VCSEL array 8 channels PIN photo detector array Power consumption <13W Hot Pluggable QSFP DD form factor Max. link length 70m over OM4 and 100m over OM5 MMF MPO 16 connector receptacle Built in digital diagnostic functions Operating case temperature 0°C to +70°C 3.3V power supply voltage RoHS compli..
JTOPTICS® QSFPDD 800GBASE DR4 is offers a transmission distance of up to 10 Km over a single mode fiber link. Quad Small Form Factor Pluggable Double Density (QSFP DD) transceiver with optical MPO 12/MTP 12 connector is designed for long range single mode 800 Gigabit Ethernet (800GbE) high speed applications of up to 800 gigabits per second. The 800 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane. It can be used as 8x100G breakout to QSFP28 DR 100G. It supports link lengths of up to 10Km parallel SMF with MTP/MPO 12 connector. It is compliant to QSFP DD MSA, IEEE 802.3 protocol and 400GAUI 8 standards.QSFP DD MSA and CMIS compliant Compliant to 802.3 800GBASE DR8 8x106.25Gbps(53.125GBd PAM4) electrical interface 8x106.25Gbps(53.125GBd PAM4) Optics architecture Power consumption <16.5W Maximum link length of 500m G.652 SMF with KP FEC MPO 16 receptacles ,Built in digital diagnostic functions&..